Wet sanded and polished! After many hours of hard work, this playfield is ready for assembly. She’s a beauty!
Can you see the plane in the reflection in the photo below? That’s an accurate reflection from thousands of feet away!
This gallery contains 36 photos.
Here’s an original Williams Medieval Madness from 1997. This was brought to me needing some minor repair and clean up. It was bought new and kept in the home ever since. It’s the nicest one I’ve ever seen and in … Continue reading
This gallery contains 1 photo.
I’ve finished the bottom of the Fathom playfield swap. I installed new bulb sockets, new drop targets, cleaned every switch, and refurbished every metal bracket and housing. Time: 30 hrs (just for the bottom) Things to note: Many of the … Continue reading
This gallery contains 2 photos.
I did my usual wet sand and polish on this CPR playfield (on left.) Here it is next to the one it’s replacing. I already did some touch up on it before getting the new one. The main difference is … Continue reading
This gallery contains 2 photos.
I got a new CPR playfield for this project. It took two years to locate one because of the rarity of these, but finally I can get this project back on track.
This gallery contains 34 photos.
Here we have a Stern Sharkey’s Shootout from 2000. This game was 100% working, but required a full shop out with new rubber. The playfield was cleaned and waxed. The only playfield touch up was repairing the drop hole near … Continue reading
This gallery contains 1 photo.
The clearcoating went well today. It is tough battling this Florida heat while spraying. My goggles fog up in about 5 minutes. This Playfield is going to look spectacular when it is finished. Time to let it sit awhile before … Continue reading
This gallery contains 1 photo.
Next up…Bally Playboy. Touch up is all done. Time to start the clear coat process. Stay tuned.
This gallery contains 1 photo.
This baby is done! I had to repair another coil and clean most the Playfield switches, but she’s ready to go.
